Legal Notice Prices Map Site
Home
About Us
Products
 Design Library
Services
Prices
Customers
Press
Legal Notice
Privacy
Map Site
Contact Us

We help you
BUY AND SELL
PRODUCTS


 Second Hand Machines



New in ProLace Version 2.0
This new ProLace version is a very big step forward. Powerful new automatic stitches, exiting new features in existing automatic stitches and a dramatically improved performance makes ProLace 2.0 a great deal.

New Commands
A number of new commands are now available. All these commands help to speed up the design and punching process a lot.
  DROP – Design a shape like a drop
With the command DROP you can design an object with the shape of a drop.
First you specify the size of the circle and then the position of the point.
  DBLATT – Divided Blattstitch
The command DBLATT enables you to construct a divided blattstitch. This stitch type can be used e.g. to fill a leave or it can be used in case that two blattstitch are coming together.
  CGEFLECT – Fill area with curves
This new command is the highlight of the new ProLace version. Now with this function you can fill an area not only with straight lines, but also with curves.
Just design two or more inclination curves and the system will fill the area between the first and the last inclination curve automatically with stitches.
 GBORER,  CBORER,  RBORER,  EBORER,  DBORER
Another important wish of our customers was to get automatic stitches to embroider round holes. Now functions for circular-, rectangular-, elliptical-, drop- and general holes are available.
 UNDER – Underlayers
Standard underlayers as well as underlayers for chemical lace came to this version too.

Just select a blattstitch, specify the underlayer distance from the boundary of the blattstitch and choose one of 4 underlayer types.
Commands with new features

Not only new commands were added to this new release, also many existing commands were improved a lot.
Blattstitch and Geflect commands

New features are available for this stitch types and the option menu is standardized for both of them, so the full range of features are now available for these stitch types.

Now it is possible to define a transition, to specify various stitch patterns and to apply a random ray length to an object.

Also overstitch is now available for both, blattstitch and gefelct.

Effects with variable stitch density

With the new Transition option you can produce 3D effects.

Even a blattstitch or geflect with random stitch density (irregular) can be generated.
More powerful patterns

With the option Define pattern… you can define a stitch pattern for the geflect as well as for the blattstitch.

If you define the pattern with Intersection Lines you have the new option Shift.
Random ray length

Random ray length can be defined for blattstitch and geflect.

Now also both sides can be random.
ARCFILL – Fill areas with curves

The ARCFILL command now works same as the new CGEFLECT command. You design two or more inclination curves and the system fills the area between the first and the last inclination curve with polyarcs.

If the density is not ok you don’t have to erase and redefine the effect. You just modify it with the normal MODIFY command.
STEP, AUXLIN Divide

For both commands you have the new option Corner.

If Corner is Off the system ignores corners and every stitch or segment has the same length independent of the radius.

If the Corner option is On the system takes care for corners and changes the stitch length in sharp curves.

With a system variable you can have influence on how the system calculates the stitch length in sharp curves.
Changeable stitch length for manually punched sequences

When you punch manually, long stitches are automatically divided in shorter segments with a definable length.
With the MODIFY command you can now change the length of these segments.

As you must use this new feature carefully, the ability to modify the stitch length can be enabled and disabled with a system parameter.

SETDEF – Save and Read embroidery parameters
This command enables you to write all parameters of all effects and stitch types into a file or to read the parameters from a previously written file. In this way you can define settings for different kind of fabrics and yarns and recall these settings whenever you need them again.
What else?

This is not yet all! There are still many other features coming along with this release. Below you get a brief description of them.

·       The automatic stitches DOT, STAR, CIRBLATT and the new borer commands CBORER, RBORER, EBORER and DBORER got the option Select. This option enables you to select existing entities like circles and fill them with the corresponding effect.

·       In the MIRROR command an existing line or polyline can be select as mirror axis. Also the grid can be used as mirror axis.

·       In the COPYALOV command you can flip now the design horizontally and vertically.

·       The command DRAWREP allows you to copy to the repeat with and without stitches.

·       With the AUXLIN > Divide command you can define in how many segments the polyline must be divided, or you specify the segment length as you did before and the system calculates the number of segments.

·       If you use the EXPLODE command in the design mode you can open a window to select objects.

·       You can explode manually punched stitches to simple polylines.

·       The point, where you specify the radius of a DOT points now in the stitch direction.

·       The single sided ZUCHOLE is now also based on the center line of the effect. This improves the stitch distribution in curves a lot.

·       The command MODIFY contains the new option Rotate to rotate dots, star-dots and circular Blattstitches.

·       With a new system parameter you can define the relation between short and long stitch in Geflect turn stitches.

·       If you write stitch data and use the Function automatic mode you can define if you want to insert an empty stitch after Needle On.